Gate Repair in Costa Mesa - Same-Day Service, Priced Before We Start
Same-day gate service with the price agreed before we start. Licensed and insured engineers covering repairs, operators and access control across the whole area.
We answer around the clock
See the Difference We Make
What Our Customers Are Saying
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
Areas We Proudly Serve
Serving Costa Mesa, CA - Our Local Coverage Area
We're based in the Costa Mesa area and know this community well. Use the map below to see our service coverage - if you're nearby, we can almost certainly help.
Our Simple 3-Step Process
Request Service or Call Us
Call us or send a quick message. Tell us your gate repair issue and we'll schedule a convenient time.
Inspection & Free Estimate
Our technician arrives on time, inspects the problem, and gives a clear, upfront estimate with no hidden fees.
Fast Repair on the Spot
We fix the issue quickly using high-quality parts and proven techniques - working like new before we leave.
Don't let a broken gate repair slow you down. Contact Ironworks Gate Co. today and our experts will handle everything - from diagnosis to repair, quickly.
Call (213) 754-8947
The Smart Choice For Gate Repair
Same-Day Response
Fast dispatch across Costa Mesa. Most jobs handled the same day you call.
Licensed & Insured
Background-checked, certified technicians who meet every local requirement.
Upfront Pricing
Clear written estimates before any work begins - no hidden fees, ever.
Guaranteed Work
Every repair backed by our workmanship warranty and satisfaction guarantee.
At Ironworks Gate Co., we specialize in fast, reliable, and affordable gate repair services for homeowners and businesses.
About Us
Request Your Free Estimate
Prefer to talk now? Call us directly - we answer fast and dispatch even faster. No obligation, no sales pitch.
Call or Text(213) 754-8947Request A Free Quote
Gate Repair Service Across the Costa Mesa Area
We Are the Costa Mesa Team for Ironworks.
Ironworks repairs and automates driveway and estate gates - welding, hinges, openers, keypads - with a blacksmith's respect for the metal and an electrician's respect for the motor. The company that makes a 40-year-old gate close like the day it was hung.
Same training, same parts, same pricing practice, and the same 90-Day Done Right Promise - delivered by people who live here.
Visit Ironworks →Part of the Keystone Family.
Keystone is a family of home-service brands held to one written standard, and Ironworks is the gate repair company in it. One promise stands behind every trade, in every town.
Expert Gate Repair and Installation Services
Every job on this list is handled by trained, background-checked technicians working to one national standard, priced upfront from a free estimate.
Electric and Automatic Gate Repair
Sagging hinges, jumped chains, dead control boards and electric gates that stop halfway. Repaired on site in most cases.
Learn More →
Free Gate Estimates
A technician tests the gate and the operator, then quotes the full repair or replacement before any work begins.
Learn More →
Gate Opener Replacement
Swing and slide operators sized to your gate weight and daily cycle count, with safety sensors set and tested.
Learn More →
Gate Installation
Custom iron, steel and wood gates measured, fabricated and hung square on footings that hold their line.
Learn More →Premium, Long-Lasting Gate Parts
The part decides how long the repair lasts. Here is what we fit, and what the cheap version costs you later.
Gate Operators
The operator is the motor that moves the gate. It absorbs every open and close, so its duty rating decides how many years you get out of it.
We install operators sized to the real weight of the gate and its daily cycle count, with a metal gear train, a soft start and stop, and a proper manual release.
An undersized residential operator on a heavy gate runs at its limit on every cycle. Plastic gear trains strip, the motor overheats, and the unit is finished in a couple of seasons.
Hinges
Hinges carry the entire weight of a swing gate. A gate that sags almost always has a hinge problem, not a gate problem.
We use heavy welded steel hinges with greasable bearings and adjustable posts, so the gate can be brought back to level later without cutting anything apart.
Light bolt-on hinges with a plain steel pin wear oval within a year or two. The gate drops on the latch side, drags on the driveway, and starts binding the operator.
Chains and Racks
A sliding gate is driven either by a chain or by a toothed rack. Either way, that part takes the shock on every start and every stop.
We fit galvanized heavy-pitch chain, or steel rack welded on a straight line and tensioned properly, so the load spreads across several teeth at once.
Thin unplated chain rusts and stretches until it jumps the sprocket, and plastic rack teeth shear off in cold weather and leave the gate stuck in the driveway.
Control Boards
The control board is the electronics that read your remote, your keypad and your safety sensors. It also takes the first hit in a power surge.
We install boards with a conformal coating and surge protection, mounted in a sealed weather-rated enclosure and properly grounded.
A bare board in a loose plastic box collects condensation and insects. One nearby strike or one wet week and the gate stops responding to anything at all.
Safety Photo Eyes
Photo eyes are the beam across the driveway that stops the gate when something is in the way. They are the difference between a nuisance and an accident.
We install sealed weather-rated photo eyes on solid brackets, aligned and tested, and wired so that a sensor fault stops the gate instead of being ignored.
Unsealed indoor-grade eyes on flimsy brackets drift out of alignment with the first bump, and the shortcut fix is to bypass the safety input so it stops tripping.